10 – 30 November

All Green
November

Offer ends in

00Days
00Hours
00Minutes
00Seconds
See All Discounts

Limited to available stock.

10 NovUpgrades 15% off
16 NovV-Core 300 & 500
30 NovLast day

All Green November · Week 2

More deals unlocked

The V-Core joins the sale: 30% off the V-Core 300 Mechanical Kit and, for the first time, a discount on the V-Core 500 Standard Kit.

V-Core 4.1 in three sizes on a green background
30% off

V-Core 300 Mechanical Kit

The mechanical kit for the 300 size, ready for the electronics of your choice.

Up to 10% off

V-Core 500 Standard Kit

Machine kit plus electronics kit, and it gets cheaper the more you build. A good fit for workshops and print farms.

5%1 machine7%2 machines10%3 or more

Week 1 · Upgrades first

Upgrade the V-Core
you already own

All Green November opens with our upgrade kits. Keep the machine you built and take it further, with 15% off both kits.

01/ 02

V-Core 4.1 toolhead on its linear rail

15% off

Upgrade 01

V-Core 4.0 to 4.1 Upgrade Kit

Bring your V-Core 4.0 up to the 4.1 spec without starting from scratch. Everything you need to update the machine you already have.

Shop the upgrade
V-Core 4.1 frame with the Hybrid upgrade kit parts highlighted

15% off

Upgrade 02

V-Core 4.1 Hybrid Upgrade Kit

Turn your V-Core 4.1 into a Hybrid. The upgrade kit adds the parts to convert your current frame, no new machine required.

Shop the upgrade

Watch now our

Latest Video

Looking for an Upgrade?

V-Core 4.1 - HYBRID UPGRADE

Boost your printing performance with the Hybrid upgrade kit

Hybrid is a performance upgrade that gives a power boost to your Y
axis by adding a couple of extra motors along with all the necessary
hardware, allowing you to reach more precision at higher speeds. This
upgrade dramatically improves the recommended acceleration for input
shaping, cutting down print time while maintaining top-notch quality.
Get more done in less time!

No rebuild of the machine is necessary, converting between modes is
just a matter of swapping a few components on your existing build.

Rat Rig PunkFil - Balls Blue - ABS Filament 1.75mm 1kg
Rat Rig PunkFil - Rancid Red - ABS Filament 1.75mm 1kg
Rat Rig PunkFil - Brute Black - ABS Filament 1.75mm 1kg
11 / 2

Stay up-to-date

Blog posts

IDEX Printing, Explained
Guides

IDEX Printing, Explained

What IDEX actually buys you over a single toolhead with an MMU, how Toolshift gets rid of wipe towers, and what calibration looks like with Beacon and VAOC.
Beacon & Z Calibration, Explained
3D Printers

Beacon & Z Calibration, Explained

How Beacon Contact and RatOS turn Z calibration from a recurring chore into a single click, and why that matters for every first layer you print.
The V-Core 4.1 Hybrid Upgrade, Explained
3D Printers

The V-Core 4.1 Hybrid Upgrade, Explained

What the Hybrid upgrade changes mechanically, why two extra Y axis motors let you push accelerations further, and what it actually costs you in extra build complexity.