News
3D Printers
Beacon & Z Calibration, Explained
How Beacon Contact and RatOS turn Z calibration from a recurring chore into a single click, and why that matters for every first layer you print.
Firmware
RatOS 2.1: Smarter First Layers, Explained
What actually changed in RatOS 2.1, adaptive heat soak, smarter mesh compensation, and one click setup, and why it helps even if you're not on a V-Core 4.1.

Firmware
RatOS Explained: The Firmware Behind Every V-Core
What RatOS is, why it powers every V-Core out of the box, the standout features worth knowing, and what changed in the latest 2.1.1 update.

