Getting a perfect first layer used to mean trial, error, and a fair bit of babysitting. RatOS 2.1 is the release that changes that, and most of the improvement comes from software, not new hardware.
We cover the full walkthrough in this episode of Rat Rig TV:
For the full overview of what RatOS is and does, see our RatOS firmware explainer. This one is just about what's new in 2.1.
Smarter first layers
RatOS 2.1 introduces an improved compensation mesh alongside multi point true zero measurement, building on the Beacon based calibration we cover in Beacon & Z Calibration, Explained. In practice, that means the firmware now understands the tiniest quirks in your bed surface, right down to the texture of the flexplate, and corrects for them automatically. Instead of trial and error, you get repeatable results from the first print.
Adaptive heat soak
Reaching thermal stability used to mean waiting a fixed amount of time, often longer than actually necessary, because there was no reliable way to know when the machine had truly settled. Adaptive Heat Soak uses data from your proximity sensor to judge when the machine is actually ready, and adjusts the soak time accordingly.
This matters most on a V-Core 4.0 with an aluminium gantry, where thermal expansion between the steel rail and aluminium extrusion takes longer to settle. On the V-Core 4.1, both the gantry and rail are steel, so thermal expansion is uniform and the system stabilises faster to begin with. Either way, RatOS 2.1 is what's actually doing the work behind the more reliable first layers people have reported since the 4.1 launched.
Setup that configures itself
Picking V-Core 4.1 in the RatOS configurator now auto loads the correct defaults: sensors, lights, filters, even IDEX toolhead alignment where relevant. No manual pin mapping, no copying macros by hand.
Not just for the 4.1
These improvements aren't locked to new hardware. They apply just as much to an existing V-Core 4.0, and to a V-Core 3 fitted with a Beacon probe. If you're running RatOS, updating to 2.1 is worth doing regardless of which V-Core you have.
Your rig, your rules.


