RASPBERRY PI 3 A+

The Raspberry Pi 3 Model A+ comes with the Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE in the same mechanical format as the Raspberry Pi 1 Model A+.
With Extended 40-pin GPIO header and Full-size HDMI it is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the model B+ but does away with the Ethernet jack and three of the USB Ports. This makes it lower power, less expensive and much lighter & smaller!
It’s still compatible with all Pi operating systems and software and has the exact same 40 pin GPIO connector and camera/display sockets, so any HATs or Pi Plates or other things that plug into the model B+ will work just the same.
It also has the same HDMI, sound/composite connector and micro-USB connector for power
Unlike the Raspberry Model B+, there’s only one USB port and no ethernet jack but it’s also significantly smaller at 65mm x 56mm if you don’t include overhang from the connectors.
Don’t forget, you’ll need a USB power supply with micro USB cable, and a microSD card with a Raspberry Pi OS on it (we suggest a Raspbian 4G card or NooBS 8G card)

Technical Specifications:
• Clock Speed: 1.4 GHz
• RAM: 512MB LPDDR2 SDRAM
• Processor: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
• Operating Power: 5V/2.5A DC
• Micro-SD Card Slot: Yes (FAT32 format), support maximum 32G Micro SD Card Memory Features
• On Board Ports: 4-pole stereo output and composite video port, CSI camera port for connecting a Raspberry Pi Camera Module, DSI display port for connecting a Raspberry Pi Touch Display, Full-size HDMI Output Port, Micro SD port for loading your operating system and storing data, Micro-USB 5V/2.5A DC Power Input Port, Single USB 2.0 ports
• Dimensions (mm) LxWxH: 65 x 56 x 30