Rat Rig's CNC Line-up, Explained

Rat Rig's CNC Line-up, Explained

What sets the StrongHold ONE and StrongHold PRO apart, what materials each is actually built for, and how to pick the right one for your workshop.

Our CNC line-up is built around clear tiers rather than one machine trying to do everything: the Mill, the StrongHold ONE and the StrongHold PRO. Each is built for a specific range of materials and work sizes, so picking between them comes down to what you're actually going to cut.

Mill: built for small aluminium parts

Rat Rig Mill, perfect for small aluminium parts

The Mill is the smallest and most compact machine in the line-up, with a 360×160×116mm work area, and the only one of the three that supports all three electronics bundles, Beginner, Intermediate and Advanced. Its compact, rigid mill architecture makes it the best choice in the line-up for small, precise parts in aluminium and other metals.

StrongHold ONE: built for woodworking

Rat Rig StrongHold ONE CNC, perfect for woodworking

The StrongHold ONE is available in three work areas, 750×750mm, 750×1250mm and 1250×1250mm, and pairs with the Beginner or Intermediate electronics bundle. It's at its best on wood, MDF, foams, acrylics and PVC, the materials most woodworkers and sign makers actually spend their time on.

StrongHold PRO: built for every job

Rat Rig StrongHold PRO CNC, perfect for every job

The StrongHold PRO steps up in both size and rigidity, with work areas of 1000×1000mm, 1000×1500mm and 1500×1500mm. It only ships with the Intermediate or Advanced electronics bundle, since it's built with harder materials in mind, non-ferrous metals included.

Which materials suit which machine

As a rule, material hardness and work area size pull in opposite directions: the bigger the machine gets, the more it trades rigidity for reach. That's why the PRO, despite the name, isn't necessarily the better choice for every material, it's the better choice for bigger parts and tougher jobs within its size range.

Material Mill StrongHold ONE StrongHold PRO
Foams Great Great Great
Soft wood Great Great Great
MDF Great Great Great
Hard wood Great Great Great
PVC Great Great Great
Acrylics Great Great Great
Aluminium Great Workable Great
Copper Great Not ideal Workable
Brass Great Not ideal Workable
Steel Workable Not ideal Not ideal

Interestingly, the Mill handles metals better than either the StrongHold ONE or the StrongHold PRO, despite being the smallest machine in the line-up: a compact, rigid mill architecture suits hard materials in a way a larger gantry machine doesn't. If you need to cut steel reliably, none of the three is the right tool for the job, that calls for a different class of machine entirely.

Picking your electronics

Which bundle you can choose follows directly from the machine: the Mill supports all three, the StrongHold ONE pairs with the Beginner or Intermediate bundle, the StrongHold PRO with Intermediate or Advanced. We go into what's actually in each bundle, and the two enclosures that house them, in our full breakdown of the CNC electronics ecosystem.

Your rig, your rules.

More from the blog