Product added to cart
Bed Plate - Cast tooling plate - Pre-Machined - (BARGAIN STOCK) (Multiple Sizes)
In stock
SKU
BED6MM_BARGAIN
Note: You are looking at our bargain page for the Cast tooling plates. This is a temporary and highly discounted section where you can order 6mm cast tooling that are not quite up to spec at a much cheaper price. These could be useful to some. By not up to spec, we mean that they are not flat enough, or have small aesthetic or surface imperfections like scratches or small dents.
Bed variance range according to stock grade.
Size | B-Stock - 20% off | C-Stock - 50% off | 400 | 0.40 - 0.50 (mm) | - |
500 | 0.50 - 0.75 (mm) | 0.75 - 1.00 (mm) |
Note: You are looking at our B-Stock page for the Cast tooling plates. This is a temporary and highly discounted section where you can order 6mm cast tooling that are not quite up to spec at a much cheaper price. These could be useful to some. By not up to spec, we mean that they are not flat enough, or have small aesthetic or surface imperfections like scratches or small dents.
No more sourcing superflat plates and drilling them at home! We've done it for you. Finally a 6mm pre-machined custom cast plate at a great price.
Bed variance range acconding to stock grade.
Size | B-Stock - 20% off | C-Stock - 50% off | D-Stock - 70% off |
300 | 0.30 - 0.40 (mm) | 0.40 - 0.70 (mm) | 0.70 - 2.00 (mm) |
400 | 0.40 - 0.50 (mm) | 0.50 - 0.70 (mm) | 0.70 - 2.00 (mm) |
500 | 0.50 - 0.75 (mm) | 0.75 - 1.00 (mm) | 1.00 - 2.00 (mm) |
These were custom made for the V-Core 3, but versatile enough to be used on a number of different printers. With that in mind, we set out to design a pre-machined cast tooling plate that would have great flatness at a great price. There are many cast plates out there, but very few are nicely pre-machined with countersunk mounting holes, chamfering etc.
Specs: - Material: Cast Aluminium AL5083 6mm thick - Surface Machining: Milled surface for final flatness - Available in 329mm*329mm*6mm, 429mm*429mm*6mm, 529mm*529mm*6mm sizes - Countersinks for M5 Countersink screws (ie. DIN7991) - 6x Mount holes for compatibility with both standard 4 screw mount printers(V-Cast), and 3 screw mount printers(ie. V-Core 3 kinematic mount) - Extra accessory holes for bed grounding, thermal fuse etc.
Our custom Keenovo heatpads are designed specifically for these plates, with the wiring bundle placed slightly off center, ideal for 3 point kinematic setups. Find those in our store.
Write Your Own Review