FlexPlate PRO Set - Black Textured PEI 184 x 184 mm - Double Sided

Double-sided PEI flexplate, textured on both sides with a sleek black finish. Featuring fine-textured, ultra-sticky 100% real Ultem1000（PEI）that ensures perfect adhesion to your printer bed every time, resulting in less filament waste and working time.

This flexplate is flat, flexible, and sticks to the bed magnet extremely well, making the print removal process much easier; simply remove the spring steel plate from the printer give it a small bend and the prints will pop right off

Features
- Magnetic and flexible
- PEI is one of the best surfaces you can use for printing
- Very Easy to use
- Fits most printers
- Strong and durable
- Printing surface max rated temperature: 200ºC.
- Soft magnetic max rated temperature: 130ºC

Usage Guidelines
Instalation: Unpack your FlexPlate, attach the magnetic surface to your print bed and then attach the spring steel plate with the PEI attached to it onto the magnetic surface. Remove the protective film from the PEI and re-level your print bed. You are now ready to print away. Parts should come free from the surface with almost no issue at all. PLA does not require heat but turning the heated bed up to 45C helps. You don´t need any adhesives but if you are going to print something large or for a long time, it can sometimes be good to use an adhesive stick, it will make your parts stick even better and release even easier when the print is done. After the print is done, just let the plate cool down, remove the plate and give it a gentle bend. You can then just “pop” the model off the plate.
Cleaning: Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
Use isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use.